升降舞台如何确保其安全性？

升降舞台http://www.sdsjpt.net/是每个剧场都需要的，舞台设计中要更多考虑安全的问题。那么应该如何确保升降舞台的安全呢？

1、升降舞台安装刹车装置用来控制升降机曳引机器部分起动遏制的制动器。
Landing stage install brakes to control the elevator hoisting machine start-stop brake part.
2、升降舞台安装限位开关以限止轿厢开到最高位置或最低位置不能担当运转的装配。
Landing stage limit switches to limiting the car open to the highest or lowest position can not assume the position of the assembly operation.

3、升降舞台安装越程开关以使轿厢行驶到最高位置或最低位置时，轿厢就会担当上升或下降。舞台设备为了防备轿厢冲顶或沉底，应拆卸能切断电源和不能自动复位的越程开关，并装在机房内，而不能装在井道内，应装设具有领受举动机构能量并减少冲击的缓冲器。
When the landing stage overtravel switches installed with the car to its highest position or the lowest position, the car will serve as rising or falling. Stage equipment in order to prepare the car jump or sink to the bottom, you should be able to cut off the power supply and can not disassemble automatic reset overtravel switch and installed in the engine room, but can not be installed in the shaft, should be installed with a move bodies receive energy and reduce the impact of buffer.
4、为了增添轿厢冲顶或沉底的能量，安装升降舞台http://www.sdsjpt.net/缓冲器与轿厢触碰处拆卸橡皮或海绵，以增添其冲击能量，绳槽打滑等导致轿厢突然坠落事变。
In order to increase the energy of the car jump or sink to the bottom, and the car bumper installation landing stage at dismantling touch rubber or sponge to increase its impact energy, rope groove slip suddenly fall as a result of the car incident.
5、为了防止由于吊重钢丝绳断裂，应在轿厢上拆卸能同时切断控制电源和使轿厢停止下坠的保险钳。
In order to prevent the hoist rope breaks, should be able to cut off the demolition control power and stop the car falling clamp on the car insurance.